top of page


  Product Description


  • The sleek design single-piece die-cast AD12 aluminum housing has integral heat sink fins maximizing thermal management through conductive and convective cooling.

  • The LED driver is mounted in direct contact with the housing for effective heat dissipation to promote low operating temp and long life.

  • Housing is completely sealed against moisture and environmental contaminants  (IP65). Ultra-low EPA (0.652) ft2



  • Specially designed UV-resistant acrylic optics, available in Type II, III, IV, V distributions. Silicone gasket ensures a weather-proof seal around each individual optics. Optics rotatable (90° increment) and interchangeable in field.

  • Full cutoff (U0) when mounted with non-adjustable pole mount (SR) or 0 degree tilt with adjustable Slipfitter (SF), meets Dark Sky requirement.

  • Optional backlight cover for optics available.


  • 80+ CRI Samsung LED.

  • -40°C up to 50°C (-40°F up to 122°F) maximum operating temperature.

  • Long-life greater than 100,000 hr LED at L80.

  • Driver operates at 120-277V input, 0-10V dimmable driver, down to 10%.

  • 50/60Hz, <20% THD, 0.9 power factor.

  • Standard 4kV surge protection, additional 10kV inline surge protection optional.

  • Optional 347/480V input driver.

CONTROL (optional)

  • SENSOR-DC15 integral passive infrared programmable motion/photocell.

  • SENSOR-311 integral passive infrared BluetoothTM programmable motion/photocell.

  • SENSOR-PH-PT twist lock dimming/non-dimming photocontrol.

  • BluetoothTM Mash Twist-Lock photocontrol.


  • 3G rated (SR) mount allows lightning fast installation of ALS luminaires onto square or round pole application seamlessly.

  • Optional adjustable slipfitter for 2-3/8” tenon.

  • Optional non-adjustable wall mount bracket.

  • Optional adjustable yoke mount bracket.


  • Thermoset polyester corrosion resistant powder coating finish.

  • Standard stock: Dark Bronze

  • Optional custom paint available, please consult factory.



  • IP65 Wet location label standard.

  • Meets Buy America Act requirements.

  • IDA compliant: with 3000K color temperature selection.

  • Title 24 compliant; see local ordinance for qualification information.

  • All luminaires are built to UL1598 standards and bear appropriate cETLus labels.

  • DLC® Premium (DesignLights Consortium Qualified) pending.



  • 7 year warranty, see Limited Warranty for additional information.

  Specs Overview

Lumen Package




Efficacy Range (LPW)

Life Expectancy (hr)

Quick Ship

11,250 - 48,000

75 - 320

3000 / 4000 / 5000


142 - 151



  Resource Files

  Spec Sheet

  IES File


  Installation Sheet

bottom of page